江苏先锋干燥工程有限公司(原:常州先锋干燥设备有限公司)  服务热线:400-8585-815  

国家高新技术企业  行业标准主起草单位  中国干燥设备行业协会副理事长  中国干燥设备十强企业

Chinese high-tech enterprises, Industry-standard's draftsman, China dryer guild vice chairman, China Top10 of dryer .
当前位置: 首页 > 新闻中心 > 行业新闻

行业新闻

Dedert环式干燥机

Dedert环式干燥机使用当产品不能有效地在单通的闪蒸干燥机干燥的情况下,特别是散,膏,蛋糕或泥浆,需要延长干燥时间,Dedert的环式干燥机解决方案。

不同的技术之间的闪蒸干燥机和环式干燥机分类器(气歧管),从而使半干燥产品的再循环额外的干燥和分散的初始热区注册成立。这分类实现通过调整叶片切成已离心分类的材料的层。分流叶片的调整和设置,由合格的Dedert工程师环机的调试过程中,需要调整一次设置。

光环上的干衣机的回收材料允许的排气温度相对较低时要使用的实现所需的最终水分含量。干燥效率的提高和产品质量的变化是有限的。

Dedert设计并建成了世界上最大的半封闭的环机179,000 ACFM是在一个单一的单元,能够以每小时34吨的水蒸发。

Dedert's Fluid Bed Dryer provides for gentle yet efficient drying action, which is ideal for friable or soft agglomerated particles with a fairly narrow particle size distribution and medium size particles (200 – 400 Microns).

Product is fluidized by the process gas stream entering the dryer through the distributor plate. Dedert has a variety of distributor plates available depending on the application.

Process drying air could be designed as multi-zone to enhance drying characteristics in different parts of the bed. Exhaust air leaves the dryer through a hood and is further cleaned in cyclones or bag filters to maximize product recovery while meeting emission guarantees.

Fluidized heating and cooling zones can be integrated into a single unit in a Fluid Bed Dryer. Submerged extended surface heat exchangers can also be incorporated: this approach maximizes the heat transfer rate. Submerged heat transfer area can be retrofitted to existing Fluid Bed Dryers to increase evaporative capacity.

RING DRYERS

Dedert Ring Dryers are used when products cannot be efficiently dried in single pass Flash Dryers. In cases where particular powders, pastes, cakes or slurries require extended drying times, the Dedert Ring Dryer is the solution.

The differentiating technology between the Flash Dryer and the Ring Dryer is the incorporation of a classifier (manifold), which enables the recirculation of semi-dried product back to the initial heat zone for additional drying and dispersion. The classifier achieves this by the adjustment of blades which cut into the layer of material that has been centrifugally classified. The splitter blades are adjusted and set by qualified Dedert engineers during the commissioning of the Ring Dryer and need not be adjusted once set.

The recycled material on the Ring Dryer allows a comparatively lower exhaust temperature to be used while achieving the desired final moisture content. Drying efficiency is improved and variations in product quality are limited.

Dedert has designed and built the world’s largest partially-closed Ring Dryer at 179,000 ACFM and is able to evaporate 34 tons of water per hour in a single unit.

走进先锋 | 新闻中心 | 产品中心 | 服务中心 | 技术中心 | 精品工程 | 人才招聘 | 联系我们 | 供应信息 | 网站地图